1060/6061/2A12/7075 aluminium bar main advantages

1.1060/6061/2A12/7075 aluminium bar has five advantages: remarkable energy saving effect:
 
(1) Good thermal conductivity: Aluminum alloy has excellent thermal conductivity, the evaporation temperature of refrigerant and the temperature difference of aluminium exhaust surface will decrease, the evaporation temperature will increase, the energy efficiency ratio of compressor will increase, and the energy consumption will decrease;
 
(2) 1060/6061/2A12/7075 aluminium bar Special structure: Aluminum alloy fin tube's fin is parallel to aluminium tube, forming sheet shape. The formed aluminium row fixes the sheet fin tube parallel, forming several parallel passages. When refrigeration system works, the cold air forms flue effect in the passage, which is accelerated to sink and convection is accelerated. So the cooling speed is fast, the compressor stops running when the set temperature is reached, and a lot of electricity is saved. Able;
 
(3) 1060/6061/2A12/7075 aluminium bar set up well and have high efficiency: the projection area and evaporation area of the aluminium row can be one to three or one to four, so that the aluminium row can be installed on the top of the cold storage, so that the heat transfer capacity per unit area can be higher and more energy-saving than that of the wall row. Secondly, it has a certain cooling storage effect, the frequent start-up frequency of the compressor is reduced, and a certain amount of energy consumption can be saved. ;
 
(4) 1060/6061/2A12/7075 aluminium bar Light weight, easy installation: the weight of aluminium row is about one sixth of the area of evaporator, which is about one sixth of the steel pipe 38. Installation convenience can save a lot of structural investment, and save energy consumption of production structure. (5) The amount of refrigerant used in aluminium row is less: the fin tube used in aluminium row is the inner thread structure of outer fin.
 
The refrigerant charge will be greatly reduced, which can save refrigerant cost and energy consumption in refrigerant production.
 
2. The dry consumption of 1060/6061/2A12/7075 aluminium bar is low: the aluminium bars are hoisted on the top of the warehouse to form direct cooling natural convective heat transfer, which reduces the dry consumption of cooled food to zui. The consumption of food is aggravated when the compressor works, and it is alleviated when the compressor is shut down. Because the cooling speed of the aluminium exhaust is very fast, the working time of the compressor is shortened and the shutdown time is long, the refrigeratory made of this aluminium exhaust has less dry consumption of food, better fresh-keeping effect of food and less frosting on the aluminium exhaust, which makes the humidity in the storage moderate, the temperature stable and the constant temperature and humidity. The effect is good.  
 
3. 1060/6061/2A12/7075 aluminium bar platoon's electrothermal defrosting function: long life, high temperature resistance, high insulation grade electric heating wire is selected, and a water tank is equipped at the same time, which ends the difficulty of defrosting the cold drain pipe.
 
4. 1060/6061/2A12/7075 aluminium bar has high pressure resistance: the strength of aluminium fin and tube is improved by one-step die casting, and the pressure resistance of aluminium tube is also greatly improved. The aluminium exhaust pipe has passed 2.5 MP air-tight test when it leaves the factory. When it is tested for 4.5 MP pressure endurance life, the aluminium exhaust pipe is safe and sound.  
 
5.1060/6061/2A12/7075 aluminium bars is clean and prolongs the service life of compressors: special treatment is carried out in tubes to ensure the internal cleanliness of aluminium bars. The aluminium alloy Jin brand with strong anticorrosive ability is used. The surface is treated by special technology. Its service life is more than 20 years, and it meets the food hygiene standard at the same time.