5056 cold drawn aluminum flat bar tube

5056 cold drawn aluminum flat bar tube is an Al-Mg rust-proof aluminum alloy, which cannot be strengthened by heat treatment. The chemical composition of the alloy is basically similar to that of 5B05 alloy except for the lower manganese content, and the magnesium content is slightly higher than that of 5A05 alloy, and the properties are basically similar to 5B05. The alloy has good plasticity in the annealed state, its corrosion resistance is good, and its weldability is acceptable.
 
5056 cold drawn aluminum flat bar tube Chemical composition:
Silicon Si: 0.30
Iron Fe: 0.40
Copper Cu: 0.10
Manganese Mn:0.05-0.20
Chromium Cr: 0.05-0.20
Magnesium Mg: 4.5-5.6
Zinc Zn: 0.10
Aluminum Al: Allowance
Other single: 0.05
Total: 0.15
5056 aluminum alloy is commonly used in rivets for riveting aluminum alloy and magnesium alloy assemblies. There is also 5056 coated aluminum wire, which is widely used to make window screens and other wire products that require good corrosion resistance. 5056 cold drawn aluminum flat bar tube Good strength, corrosion resistance and machinability in non-heat treatable alloys. The surface is beautiful after anodizing. Can be processed into optical mechanical parts. Ship parts and wire clips.