anodised aluminium flat bar

The specifications of anodised aluminium flat barof Henan signi Aluminum are as follows:
 25mm x 5mm/25mm x 10mm/30mm x 5mm /30mm x 10mm/ 40mm x 5mm/ 40mm x 10mm/ 50mm x 5mm/ 50mm x 10mm/ 60mm x 5mm/ 60mm x 10mm/80mm x 5mm/80mm x 10mm/100mm x 5mm/100mm x 10mm/120mm x 10mm
 
anodised aluminium flat bar
 
The anodised aluminium flat bar is to place the aluminum bar in the corresponding electrolyte (such as sulfuric acid, chromic acid, oxalic acid, etc.) as the anode, and conduct electrolysis under specific conditions and applied current.
 
Anodised aluminium flat bar, a thin layer of aluminum oxide is formed on the surface, the thickness of which is 5-20 microns, and the hard anodized film can reach 60-200 microns. The anodized aluminum plate has improved its hardness and wear resistance, up to 250-500 kg/mm2, good heat resistance, the melting point of the hard anodized film is as high as 2320K, excellent insulation, and the breakdown voltage is as high as 2000V, enhanced corrosion resistance, no corrosion in ω=0.03NaCl salt spray for thousands of hours. There are a large number of micropores in the thin oxide film, which can adsorb various lubricants, which is suitable for manufacturing engine cylinders or other wear-resistant parts; the film micropores have strong adsorption capacity and can be colored into various beautiful and gorgeous colors. Non-ferrous metals or their alloys (such as aluminum, magnesium and their alloys, etc.) can be anodized.
 
The specifications of anodised aluminium flat bar of Henan signi Aluminum are as follows:
Alloy：6061 6063 T6
Size：25mm x 5mm/25mm x 10mm/30mm x 5mm /30mm x 10mm/ 40mm x 5mm/ 40mm x 10mm/ 50mm x 5mm/ 50mm x 10mm/ 60mm x 5mm/ 60mm x 10mm/80mm x 5mm/80mm x 10mm/100mm x 5mm/100mm x 10mm/120mm x 10mm