EN-AW 6060 T66 aluminium flat bar

 EN-AW 6060 T66 aluminium flat bar aluminum alloy composition is mainly magnesium and silicon, medium strength, good corrosion resistance, good welding performance, 6060 aluminum alloy, American wrought aluminum and aluminum alloy. 6000 series aluminum alloy features: mainly magnesium and silicon. Mg2Si is the main strengthening phase and the most widely used alloy. . Features: medium strength, good corrosion resistance, good welding performance, good process performance (easy to be extruded and formed), good oxidation and coloring performance.
EN-AW 6060 T66 aluminium flat bar size Our company spares all kinds of angle aluminum moulds, welcome friends from all walks of life to consult.
Width 5 to 500mm,
Thickness 0.5-30mm
Length: 6m
EN-AW 6060 T66 aluminium flat bar mechanical property
Temper condition in delivery-T66 according to EN 515 (solution heat-treated and then artificially aged).
Mechanical property limits according to EN 755-2: Tensile strength, yield Rp0.2 ≥ 150 MPa; Tensile strength, ultimate Rm ≥195 MPa; Elongation A ≥ 8%. Tolerances according to DIN EN 12020-2: 2017:
Straightness tolerance: 1.8 mm/m
Convexity-concavity tolerance: 0.4 mm
Twist tolerance: 1.5 mm/m
Angularity tolerances for right angles: 0.6 mm
Mechanical damages on all surfaces are not allowed, except surfaces G and J.
Profiles must be packed individually into thick cardboard and air-bubbled film